Fatigue crack growth property of laser beam welded 6156 aluminium alloy

Fatigue crack growth behaviours in different welding zones of laser beam welded specimens were investigated using central crack tension specimens for 6156 aluminium alloy under constant amplitude loading at nominal applied stress ratio R = 0.5, 0.06, ?1. The experimental results showed that base metal (BM) exhibited superior fatigue crack resistance compared to weld metal (WM) and heat‐affected zone (HAZ). Crack growth resistance of WM was the lowest. The exponent m values for BM and HAZ at different stress ratios are close and around 2.6, while m for WM at different stress ratio is around 4.7. The discrepancy between crack growth rates for WM and BM is more evident with increasing stress ratio, while it is a little change for HAZ and BM. Change of the microstructure in WM deteriorates the resistance of fatigue crack growth compared to BM. It was mainly due to grain boundary liquation and dissolving of second‐phase particles in the weld region. It was also found that the variety of fatigue crack resistance for different welding zones is in conformity with the change of hardness. BM with the highest hardness exhibited the maximum resistance for fatigue crack, and WM with the lowest hardness exhibited the minimum fatigue crack resistance.     

7xxx系铝合金热处理的进展

7xxx系合金是基于Al-Zn-Mg（-Cu）系的可热处理的锻铝合金，广泛应用于高性能航空结构和运输部件。除了受成分、铸造和形变热处理影响外，材料性能的平衡明显受到其所经历的热处理方式的影响。描述了均匀化、固溶处理、淬火、时效对7xxx系高强合金组织和性能的影响。总结了在Monash大学进行的有关厚板产品的生产工艺，包括从均匀化到最终的时效处理，以及通过控制微观组织特征，比如弥散体、粗粒子、精细析出相、晶粒结构和晶界特征，来实现组织与性能的平衡。重点陈述了相关方法，如通过高温热处理溶解不需要的粗粒子、基于连续冷却析出行为的淬火敏感性变化、通过实验与建模来研究时效包括一步时效、两步时效、三步时效。对每种情况下的组织与性能都进行研究。     

Solidification crack initiation and propagation in pulsed laser welding of wrought heat treatable aluminium alloy

The effect of preheating on strain rate and liquid flowrate is analysed to develop a model for solidification cracking in successive laser weld spots in 2024 aluminium alloy. It is shown that the lower tendency for solidification cracking with preheating can be attributed to the lower strain rate but not the feeding rate. It is also shown there is a strong tendency for solidification crack propagation through the fusion lines between the consecutive weld spots where there is already a crack present at the fusion line. This observation can be attributed to the higher local strain rate and lower feeding rate.     

聚硅酸铝铁絮凝剂的研究进展

聚硅酸铝铁(PSAF)作为一种新型无机高分子絮凝剂,在除浊、脱色以及去除有机物方面具有优越的性能。文献报道的浊度、色度以及有机物的最高去除率可分别达97%、98%、87%。控制PSAF性能及稳定性的关键因素是Al/Fe/Si的摩尔比、硅酸浓度、碱化度、熟化时间等;同时,PSAF的絮凝效果还受水体参数的影响。介绍了PSAF的制备、絮凝效果及其影响因素,最后简要概括了当前研究存在的问题。     

A waste heat recovery system development and analysis using ORC for the energy efficiency improvement in aluminium electrolysis cells

The present work investigates an active waste heat recovery system for the side walls of the aluminium electrolysis cells, enabling utilization of the extracted heat in power generation. This will potentially lead to energy efficiency improvement in the primary aluminium production industry and an enhanced aluminium production rate. An experimentally validated loop thermosyphon heat pipe model was used for heat extraction from the cell side wall. Boosting system thermal efficiency through waste heat recovery, by means of a heat utilization system, and increasing the level of control, as well as thermal equilibrium, stand as the main addressed objectives of the current study, which consequently result in an increased aluminium production rate. An organic Rankine cycle is incorporated into the system, and its performance is evaluated, taking into consideration the operating situations in terms of available temperature and thermal power range.     

铝金属化纸制备工艺的专利技术发展

通过对铝金属化纸领域专利技术的收集、分析、标引,介绍了铝金属化纸的制备方法及种类,包括铝粉涂布、铝箔纸以及可降解回收的真空镀铝纸等;并对其专利申请量、区域分布以及渡铝技术进行了分析,同时对各技术的发展历程和改进情况进行了梳理归纳。     

New empirical correlation for estimation of vaporization enthalpy of algerian saharan blend petroleum fractions

A Real-coded Genetic Algorithm has been used to develop a new correlation to estimate the enthalpy of vaporization for pure compounds and petroleum fractions as a function of the normal boiling point and specific gravity. In developing the correlation 80% of the data was used and the remaining are used for validation. The results of the proposed correlations are compared to others in literature. The comparison indicates that the proposed model is simple to use and more accurate than the most common correlations for predicting the enthalpy of vaporization of pure compounds and petroleum fractions.     

再现极乐净土——西方净土信仰寺院形制溯源

净土宗根源于大乘佛教西方净土信仰,是汉地佛教十宗唯一汉人开创的宗派,立宗及流行于隋唐时期,至今兴盛不衰。净土宗有《佛说无量寿经》、《佛说观无量寿经》及《佛说阿弥陀经》三部经典,分别对应敦煌壁画中无量寿经变、观无量寿经变以及阿弥陀经变,三种经变画又统称为西方净土变。通过对隋至盛唐时期(589AD~767AD)敦煌壁画中西方净土变的研读,分析总结早期西方净土信仰寺院形制的特点,解当代佛寺建筑设计创新之惑,还世人西方极乐净土庄严之精神,浪漫之意境。